How To Restore Old Teak Furniture

Restoring old teak furniture can be a rewarding experience. Not only does it bring a piece of history back to life, but it also gives you the opportunity to create a unique piece of furniture that is sure to be an eye-catching addition to your home. In this article, we’ll show you how to restore old teak furniture, from the selection process to the actual restoration process.

Selecting the Right Furniture

The first step in restoring old teak furniture is selecting the right piece. When selecting furniture, you want to look for pieces that are in good condition and can be easily restored. Look for pieces that are made of solid teak, as this will be easier to restore than pieces made of veneers. Avoid pieces that are severely damaged or have a lot of rot or mildew.

When inspecting the furniture, look for signs of wear and tear. Check for deep scratches, cracking, or splitting. Inspect the joints and look for signs of looseness or damage. Also, look for signs of water damage or staining.

Preparing the Furniture

Once you’ve selected the right piece, you’ll need to prepare it for restoration. Start by removing all hardware from the piece, such as knobs, hinges, and pulls. Then, use a vacuum cleaner to remove any dirt or dust. You may also need to use a damp cloth to remove any stubborn dirt.

Next, use a soft brush or cloth to remove any flaking wood. Make sure to brush in the direction of the grain to avoid damaging the wood. Once all of the flaking wood is removed, use a mild detergent to clean the furniture. Make sure to rinse the furniture with clean water and dry it thoroughly.

Sanding and Stripping

The next step is to sand and strip the furniture. Start by sanding the furniture with a medium grit sandpaper. Make sure to sand in the direction of the grain to avoid damaging the wood. Then, use a fine grit sandpaper to smooth out any rough spots.

Once the sanding is complete, you’ll need to strip the furniture of its old finish. You can use a chemical stripper or a heat gun for this process. Make sure to wear protective clothing and work in a well-ventilated area when using chemicals.

Staining and Finishing

Once the furniture is stripped, you can begin staining and finishing the piece. Start by applying a coat of wood conditioner to the furniture. This will help the stain to absorb evenly and prevent blotching. Then, apply a coat of wood stain and allow it to dry.

Once the stain is dry, you can begin applying the finish. You can use a variety of finishes, such as shellac, varnish, or polyurethane. Make sure to apply the finish in thin coats, allowing each coat to dry before applying the next.


Restoring old teak furniture can be a rewarding experience. By following the steps outlined above, you can bring an old piece of furniture back to life and create a unique piece for your home. With a little time and effort, you can transform an old piece of furniture into a beautiful and unique piece that is sure to be an eye-catching addition to any home.