How To Check The Quality Of Teak Wood

How To Check The Quality Of Teak Wood. The timber of grade a teak comes from the center of the tree, known as the heartwood. But teak wood does not burn very well because of it’s oil content, so it is resistant to fire.

Teak Furniture Indonesia, 5 Important Point Before You Buy
Teak Furniture Indonesia, 5 Important Point Before You Buy from handmadefurnitures.com

It is also resistant to fungal attacks that are common during the rainy season. Look for corner blocks that add to the strength and stability to a piece. Grade a, grade b, and grade c.

Most Of The Time, The Quality Of Teak Is Determined By Where They Grow And How Well They’re Maintained.

Real teak wood will be very dense and fairly heavy. Teak is also water resistant (which is one of the main reasons that it is widely used in ships, yachts, and boats) and when water comes in contact with the wood, it beads. That means older pieces of teak wood furniture may not have the bright golden yellow colour.

Plus, Teak Wood Does Not Become Too Hot During The Summer Season But Retains Its Warmth During The Cold Months.

Grade b teak wood is sometimes. If some supposedly “grade a” teak furniture seems. So, how do they differ from one another?

Teak Wood Is Smooth Textured With A Fine Grain.

It should be heavier than chipboard. Grade a teak can be recognised by a uniform, golden brown colour, close grains and glossy surface that feels oily to touch. Look for corner blocks that add to the strength and stability to a piece.

I Recently Found A Piece Of Furniture On Offer Up That I Thought Might Be Teak (A Different One Than The One Pictured Above), And When I Arrived It Was Very Light And Easy To Pick Up So I Knew It Wasn’t The Teak I Was Looking For.

It is also resistant to fungal attacks that are common during the rainy season. There are three different grades used to indicate the quality of the teak; Sheesham, on the other hand, grows more freely.

Collect The Wood And Put It To The Test.

Grade a, grade b, and grade c. You can look at these markers. 1.5 cft average per piece.